Giảm giá!

Keo H907 dùng trong bo mạch điện tử

1,000 100

EPOXYH907

Section 1 – Chemical Productc andan Company Identification
Tel: +84.0986187136 / 0985372262

Mail: thegioithiechan@gmail.com  skype: tuanlong8888

Productc identification: H907

Generale a chemical descripti Epoxy

Section 2 – Composition / Information on Ingredients
CAS NO. wt% Range
Epoxy 38891-59-7 52%
HARDENER 112-24-3 10%
filler 14808-60-7 20%
Modifier 106-92-3 13%
Other 5%

Section 3 – Hazards Identification

Health Hazards and Reactions:

Most inhaled :Stimulate nose, nausea
Skin contact: allergies, dermatitis, erythema
Important Eye contact: tingling, tears, blurred vision
Health Eating: stomach, vomiting, nausea
Hazards
Environmental Impact: —–
and
Reactions Physical and Chemical Hazards:——-
Specific Hazards:—–
Cardinal Symptoms:dizziness, headache, nausea
Hazard Classifieation:——

Generale a advice:

Section 4 – First Ai Measures

Immediately remove contaminated clothing. If danger of loses of consciousness, place patient in recovery position and
transport accordingly. Apply artificial respiration if necessary.
First-aid:
Should pay attention to their own safety.
First-aid inhalation:

Keep patient calm, remove to fresh air, and summon medical help.
First-aid skin :
Immediately wash thoroughly with, plenty of water, apply sterile dressings, consult a skin specialist.
First-aid eyes:
Immediately wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.
First-aid ingestion:
Immediately rinse mouth and then drink plenty of water, summons physician.

Suitable extinguishing media:

Section 5 – Fire Fighting Measures

Water,dry extinguishing media, foam, carbon dioxide (CO2)
Special protecti equipmen
Wear self-contained breathing apparatus and protective suit.
Further information
Collect separately contaminated extinguishing water; do not allow reaching sewerage or effluent systems.

Personal precautions

Section 6 – Accidental Release Measure

Avoidinhalation. Avoidcontact with the skin, eyes and clothing.
Environmentala precautions:
Do not let product enter drains.
Clean-up Procedures:
Small amounts contain with absorbent material and dispose. Large spillages should be dammed-off and Pumped into containers; soak up remainder with absorbent material and dispose of in accordance with local regulations.

Handling Procedures:

Section 7 – Handling and St

Protection against fire and explosion: Ensure thorough ventilation of stores and work areas. Takeprecautionary measures against static discharges.
Storage Procedure :
Keep containers tightly closed in a dry, cool and well-ventilated place. Protect from acids and acid forming substances.

Section 8 – Exposure Control / Personal Protection
(a). Respiratot r protection:
If ventilation is inadequate.
(b). Han protection:
PVC or other plastic material gloves.
(c). Ey protection:
Tightly fitting safety goggles.
(d). Bod protection:
Protective suit.
(e). Genere a safety anhygiene measures:
(f). Avoi contat c with th skin, eyes an clothing.
(g). Avoi breathin vapor.

Section

9 – Physical & Chemical Properties

Stae of Substance:
Don’t flow glue
Appeatance:
Color: black Odor:Amine-like
pH Value:—– Boiling Point:t 200 ℃
Percent Volatile: <0.1%
Self-lgniting Temperature:—– Explosion Limits:—–
Vaporo Pressure: 0.1mmHg(20℃) Specific Gravity: 1.4-1.5

Section 10 – Chemical Stability and Reactivit Information

Possible Hazard Reaction Under Special Conditions:—–
Materials to Avoid:
Strong oxidizer、Acetaldehyde, epoxy ethane, sulfuric acid、H2O2
Hazardous Decomposition Products: CO2、CO。

Section 11 – Toxicological Information

Local Reactions:—–
Sensitivity:Moderate stimulation skin, eyes
Chronic or Long Term Toxicity:—–
Special Reactions:—–

Section 12 – Ecological Information
No data available for this product. It would be expected that this product would produce toxicity to aquatic organisms And ecosystems upon exposure.
B: Componen Analysis – Ecotoxicity Aquati Toxici
No ecotoxicity data are available for this product’s components.
Environmentala Fate:
No data is available concerning environmental fate, biodegradation or bioconcentration for this product

Mô tả

EPOXYH907

Section 1 – Chemical Productc andan Company Identification
Tel: +84.0986187136 / 0985372262

Mail: thegioithiechan@gmail.com  skype: tuanlong8888

Productc identification: H907

Generale a chemical descripti Epoxy

Section 2 – Composition / Information on Ingredients
CAS NO. wt% Range
Epoxy 38891-59-7 52%
HARDENER 112-24-3 10%
filler 14808-60-7 20%
Modifier 106-92-3 13%
Other 5%

Section 3 – Hazards Identification

Health Hazards and Reactions:

Most inhaled :Stimulate nose, nausea
Skin contact: allergies, dermatitis, erythema
Important Eye contact: tingling, tears, blurred vision
Health Eating: stomach, vomiting, nausea
Hazards
Environmental Impact: —–
and
Reactions Physical and Chemical Hazards:——-
Specific Hazards:—–
Cardinal Symptoms:dizziness, headache, nausea
Hazard Classifieation:——

Generale a advice:

Section 4 – First Ai Measures

Immediately remove contaminated clothing. If danger of loses of consciousness, place patient in recovery position and
transport accordingly. Apply artificial respiration if necessary.
First-aid:
Should pay attention to their own safety.
First-aid inhalation:

Keep patient calm, remove to fresh air, and summon medical help.
First-aid skin :
Immediately wash thoroughly with, plenty of water, apply sterile dressings, consult a skin specialist.
First-aid eyes:
Immediately wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.
First-aid ingestion:
Immediately rinse mouth and then drink plenty of water, summons physician.

Suitable extinguishing media:

Section 5 – Fire Fighting Measures

Water,dry extinguishing media, foam, carbon dioxide (CO2)
Special protecti equipmen
Wear self-contained breathing apparatus and protective suit.
Further information
Collect separately contaminated extinguishing water; do not allow reaching sewerage or effluent systems.

Personal precautions

Section 6 – Accidental Release Measure

Avoidinhalation. Avoidcontact with the skin, eyes and clothing.
Environmentala precautions:
Do not let product enter drains.
Clean-up Procedures:
Small amounts contain with absorbent material and dispose. Large spillages should be dammed-off and Pumped into containers; soak up remainder with absorbent material and dispose of in accordance with local regulations.

Handling Procedures:

Section 7 – Handling and St

Protection against fire and explosion: Ensure thorough ventilation of stores and work areas. Takeprecautionary measures against static discharges.
Storage Procedure :
Keep containers tightly closed in a dry, cool and well-ventilated place. Protect from acids and acid forming substances.

Section 8 – Exposure Control / Personal Protection
(a). Respiratot r protection:
If ventilation is inadequate.
(b). Han protection:
PVC or other plastic material gloves.
(c). Ey protection:
Tightly fitting safety goggles.
(d). Bod protection:
Protective suit.
(e). Genere a safety anhygiene measures:
(f). Avoi contat c with th skin, eyes an clothing.
(g). Avoi breathin vapor.

Section

9 – Physical & Chemical Properties

Stae of Substance:
Don’t flow glue
Appeatance:
Color: black Odor:Amine-like
pH Value:—– Boiling Point:t 200 ℃
Percent Volatile: <0.1%
Self-lgniting Temperature:—– Explosion Limits:—–
Vaporo Pressure: 0.1mmHg(20℃) Specific Gravity: 1.4-1.5

Section 10 – Chemical Stability and Reactivit Information

Possible Hazard Reaction Under Special Conditions:—–
Materials to Avoid:
Strong oxidizer、Acetaldehyde, epoxy ethane, sulfuric acid、H2O2
Hazardous Decomposition Products: CO2、CO。

Section 11 – Toxicological Information

Local Reactions:—–
Sensitivity:Moderate stimulation skin, eyes
Chronic or Long Term Toxicity:—–
Special Reactions:—–

Section 12 – Ecological Information
No data available for this product. It would be expected that this product would produce toxicity to aquatic organisms And ecosystems upon exposure.
B: Componen Analysis – Ecotoxicity Aquati Toxici
No ecotoxicity data are available for this product’s components.
Environmentala Fate:
No data is available concerning environmental fate, biodegradation or bioconcentration for this product

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Keo H907 dùng trong bo mạch điện tử”